Inlet shaft with bottom

€ 17.26 * Empfohlener Verkaufspreis inkl. MwSt.

Größe in mm

Inlet shaft with bottom, 200 x 200 mm, height 200 mm, pipe connection DN 75-110


EAN-Nummer: 4002644532578

Beschreibung
Marley inlet manholes - the perfect solution for collecting and draining surface water. Universal connection options make them easy to connect to sewer pipes and provide lasting protection against building damage caused by precipitation water, e.g. from heavy rain.

Größe (mm): 200 x 200 a: 189 c: 161 h: 200 Ød1: 75 Ød2: 90 Ød3: 110 Ød4: - Ød5: -

Vorteile

Vorteile Marley Einlaufschächte

  • Made of temperature-resistant, impact-resistant plastic
  • Resistant to alkalis and acids
  • With various connection options to common pipe systems
  • High drainage capacity
  • Easy and safe to install yourself with plug-in connections

Fotos
Downloads
FAQ
The water stands on a drain and runs off very slowly. If you remove the insert/lid, the water runs off immediately. What could be the cause?
The cause is the lack of ventilation in the relevant section of the pipe. The air can only escape with difficulty or not at all. If the local conditions allow it, you can create additional ventilation or drill a 2-3 mm hole in the centre of the cover as an immediate measure.
Does a backwater valve have to be maintained?
Yes, every backwater valve, whether single or double, should be checked at least once every six months. In case of dirt and debris, remove the cover, clean the parts, check the seals and replace damaged parts. We recommend a complete check at least every 12 months.
For which types of wastewater are the backwater valves suitable?
The single and double backwater valves may only be installed in pipes with faecal-free wastewater.