A good hold!

RG 75 roof gutter holder, adjustable

Installation on the facia board or rafters. The holder can be adjusted up to 25° – e.g. with the facia boards of log or summer houses that are attached at a right angle to the roof pitch. Attachment to a vertical facia board is possible even without a base plate.

Adjusting bracket

The plastic gutter supports RG 100 and RG 125 are installed with an adjusting bracket with facia boards of log or summer houses that are attached at a right angle to the roof pitch.

Box roof gutter holder

Attachment to vertical facia boards.

Box roof gutter holder, adjustable (without fig.)

The holder can be adjusted up to 25° – e.g. with the facia boards of summer houses that are attached at a right angle to the roof pitch.

Flat iron

For the attachment of RG 75 and RG 100 duplex and box roof gutters with plastic gutter brackets to the roof batten.

Duplex roof gutter bracket, adjustable

Installation on the facia board or rafters. The holder can be adjusted up to 25° – e.g. with the facia boards of arbours that are attached at a right angle to the roof pitch. Attachment to a vertical facia board is possible even without a base plate.

Iron bracket with swivel joint, adjustable

The swivel joint eliminates the need for bending. The slope and incline of the gutter can be adjusted easily on the iron bracket. Fits RG 100 and RG 125 roof gutters.

Iron bracket

The known iron bracket version – galvanised or coated with the gutter colour – for gutters RG 75, 100, 125, 150 and box roof gutters. Bend and install the iron bracket.

Bent iron bracket

For the attachment of RG 75 and RG 100 duplex and box roof gutters with plastic gutter brackets on the side of the rafters.

Corrugated sheet roofing and boards bracket

For the attachment of RG 75 and RG 100 duplex and box roof gutters with plastic gutter brackets to shaft 8-130/3, profile 76/18 (small corrugation) and to double boards. Clamping area from 3.0 to 16.2 mm.